In the fields of precision measurement and semiconductor manufacturing, environmental vibration is a key factor affecting measurement accuracy. With the development of nanoscale measurement technology, even extremely small ground vibrations can cause measurement data distortion, and even high magnification imaging cannot be achieved. Therefore, choose a company with strong technical strengthProfessional vibration reduction table manufacturerBecoming the primary task for numerous research institutions and high-tech enterprises to improve experimental efficiency and product quality. As a company that has been deeply involved in the field of precision measurement for more than ten years, Unicon Technology, with its rich industry experience and strong technical integration capabilities, provides customers with comprehensive active vibration isolation solutions. Active isolation technology, with its excellent low-frequency isolation performance, is gradually replacing traditional passive damping solutions and becoming the mainstream choice in the industry.
As a professional manufacturer of vibration reduction tables, Unicon Technology provides an active vibration isolation system that uses piezoelectric acceleration sensors to convert external vibration pressure signals into electrical signals, which are sent to the piezoelectric transducer in the isolation module. Subsequently, a pressure signal equal in magnitude and opposite in direction to the incoming pressure is generated to eliminate the incoming vibration. The feedback loop within the system can effectively suppress all mechanical resonances, achieving an ideal isolation effect without low-frequency resonance.
One is the isolation frequency range: A high-quality active isolation system should be able to cover an active isolation range of 1-200Hz, and for higher demand application scenarios, it should also be able to extend to 0.5Hz. High end products provided by professional vibration reduction platform manufacturers can achieve passive isolation frequencies of over 200Hz, achieving full frequency range vibration protection. The UT-1000A platform from Unicon Technology can provide industry-leading active isolation performance starting from 0.5Hz, making it particularly suitable for large research instruments sensitive to low-frequency vibrations.
The second is isolation efficiency: an important indicator for measuring isolation effectiveness is transmission rate, which is the ratio of output vibration to input vibration. The leading vibration damping platform manufacturer is able to achieve excellent performance with a transmission rate of less than 0.017 (-35dB) at frequencies exceeding 10Hz, which means that over 99.98% of vibration energy is effectively isolated.
The third is response time: the response speed of an active isolation system directly affects its ability to suppress sudden vibrations. The products of professional vibration reduction table manufacturers usually have a fast response time of 5-20 milliseconds, which can complete the cancellation action at the moment of vibration generation. The AVI series active shock absorption system, represented by Nikon Technology, has a vibration recovery time of less than 10 milliseconds for some models.
Fourthly, the system noise level: A high-quality active isolation system should have its own noise level below 50nG/√ Hz to avoid additional interference with precision instruments. The full range of active vibration isolation products provided by Nikon Technology meet this strict requirement, ensuring that there will be no negative impact on the measurement results.
Firstly, examine the technology research and integration capabilities of the manufacturer. Professional vibration damping platform manufacturers should not only provide standardized products, but also have the ability to customize design and integration according to customers' special needs. Younikon Technology is not simply a device seller, but a solution provider with core research and development capabilities. It can tailor the most suitable vibration isolation solution according to the specific application scenarios and instrument characteristics of customers.
Secondly, focus on the modularity and scalability of the product. Different precision instruments have huge differences in weight and size, from microscopes weighing a few kilograms to large electron microscopes weighing several tons, all require vibration isolation protection. Excellent vibration reduction platform manufacturers should provide modular design products that meet different load-bearing requirements by increasing the number of vibration isolation modules, with a maximum load-bearing capacity of over 9000 pounds. The AVI series active vibration isolation system of Younikon Technology adopts modular design, which can flexibly configure the number of modules according to the weight of the instrument, perfectly adapting to precision equipment of various sizes and weights.
Thirdly, evaluate the after-sales service system. Active isolation systems are precision equipment that require professional installation, debugging, and regular maintenance. Choosing a vibration damping table manufacturer with branches in multiple parts of the country can ensure timely and effective technical support and after-sales service. Younikon Technology has branches or laboratories in Shanghai, Dongguan, Tianjin, Chengdu, Suzhou and other places, forming a nationwide service network that can provide 7 × 24-hour online service and 8-hour fast after-sales response.
Fourth, refer to practical application cases. By understanding the successful cases of manufacturers in the fields of semiconductors, research institutes, universities, etc., it is possible to intuitively evaluate their product performance and service quality. Younikon Technology has provided vibration isolation solutions for many well-known domestic and foreign enterprises and research institutions, accumulating rich industry experience.
WeChat Official
Support
