Active vibration isolation table -AVI series vibration isolation solution
Active vibration isolation table -AVI series vibration isolation solution
Brief description
Unicorn Technology Co., Ltd. has been providing environmental improvement solutions for a wide range of users, offering active vibration isolation performance (starting from 0.5Hz) for electron microscopes and similar large research instruments.
AVI series vibration isolation solution: By eliminating destructive low-frequency vibration noise that interferes with measurement, it helps users obtain more information from the microscope. Among them, the AVI series shock-absorbing platform adopts a thin and modular design, simplifying the installation process. Thus, during installation, there is no need to install dedicated lifting equipment for most instruments (this solution is suitable for the vast majority of EMs).
Unikang Technology Co., Ltd. provides site design solutions
Humanized customized installation
Selection: Provide suitable anti-seismic platform models based on the measurement results of the customer's site
Design: According to the planar dimensions of the electron microscope, design the size of the support plate
Goutong: Customer, electron microscope manufacturer, placement direction of electron microscopes
Drawing: Provide construction drawings for architectural decoration
Unicron Technology Co., Ltd. offers users three modes of active shockproof systems:
Passive control mode: It can eliminate ground vibrations after 7Hz
Feedback mode: The shock absorption frequency is 0.5Hz, eliminating vibrations from the ground
Feedforward control mode: It simultaneously detects the vibrations from the system on the shock absorption platform and from the ground, and then the actuator makes appropriate curve adjustments. The starting frequency of the shock absorption is 0.5Hz
Case Sharing: Installation Operation Process of Integrated Installation (TEM)
Step 1: Move the seismic platform to the designated position
Step 2: Position the TEM
Step 3: Debugging of the anti-seismic platform
Step 4: Restore the integral floor
Step 5: The anti-seismic platform is powered on and enters the working state. Installation is complete
Integrated laboratory design scheme
There is only the TEM main unit on the ground, which is convenient for maintenance. During maintenance, the ground only needs to be moved away. It is beautiful, elegant, simple and meets the requirements and standards of customers
Work
The active anti-vibration system provides a stable measurement environment for TEM, allowing users to rest assured and worry-free!
The above pictures are of TALOS F200i, taken with an ultra-high magnification of 1.6 million times on the active shock absorption system. The sample is Si Nano Wire
